GE GBS20KBPAWW Owner's Manual And Installation Instructions page 8

About the shelves and bins.
Not all features are on all models.
: o
Somemodelshavewire shelvesthat
can be adjustedin thesamemamTe_
Rearranging the Shelves
S S Y _ "
hel;e,_ in the refi_i_e_ato_ ('()ml)artment are a(!iustable
Refrigerator Compartment
Toremove:
0
Tilt the shelf up at the fi'ont.
0 I,ifl the shelf u l) at the back and
bring the shelf ()tit.
Toreplace:
0
_,_hile tiltino_ the shelf u ), insert the tel )
hook at theback of thelsheff in a slot
(m the track.
0 I,ower the fi'ont of the shelf until the
bottom of the shelf locks into place.
Spillproof Shelves (on some mode/s)
Spillproof shelves have special edges to
hel I) prevent spills fl'om dripping to lower
shelves. To i'elnove oi" replace the shelves,
see Rearranging the Shelves,
Slide-Out Spillproof Shelf (on some models)
The slide-out spillproof shelf allows you
to reach items stored behind otheis. The
spedal edges are designed to hel I) prevent
spills from dripping to lower shelves.
Toremove:
0 Reinove all items from shell
0 Slide the shelf ()tit until it stops.
iift the fl'ont edge of the shelf until the
central tabs are above the fl'ont bai:
0 Continue pulling the shelf torward
until it can be removed.
Toreplace:
0 Place the rear shelf tabs just in fi'ont of
the central notches on the shelf fl'ame,
Slide the shelf in until the central tabs
are slightly behind the fl'ont bar.
0 i,ower the shelf into place until it is
horizontal and slide the shelf in.
Make sure that the shelf sits flat after reinstallation
and doesn't move freely from side to side.
Make sure you push the shelves all the way in
before youclose the door