Automatic Icemaker - GE GBS20KBPAWW Owner's Manual And Installation Instructions

About the automatic icemaker.
A newly installed refrigerator may take 12 to 24 hours to begin making ice.
_ower Automatic Icemaker (onsomemodels)
Switch
The icemaker will produce seven cubes
per c)'cle---al)l)roxinlately ] 00-130 cubes
in a 24-hour period, depending on fl'eezer
COillpai'tlllent [eillpei'attli'e_ i'OOill
teml)erature , ilumber ot door ol)enings
and other use conditions.
See below fin" how to access ice and reach
/
PowerLight Feeler A rt
the pi)wel"
switch.
If the refl_gerator is operated before the
w;Itel" connection is lllade [1)
the
icell/akeF,
set the power switch in the 0 (off) position.
When the refl_igel'ator has been connected
to/lie water SUl_l_l)', set/lie l)l>wer switch tl)
the I (on) position,
The icemaker will fill with water when it
cools to 15°F (-10°C). A newly installed
I'efiJgeIzltor may take 12 tl) 24 houIS tl> beg_n
making ice cubes.
You will hear a buzAng sot/lid each filUe
the icemaker fills with water:
Throw away the first few batches ot ice to
allow the water line to clem:
Be sm'e nothing intet_feres with the sweep
ot the teeler amL
X&]_en the bin fills to the level of the feeler
am_, the icemaker \\'ill stop producing
ice. It is nomml for several cubes to be
joined
together:
If ice is not used fl'equenfl> old ice cubes
\\'ill become cloud); taste stale and shrink.
NOTE: In homes with lower-than-averagewater
pressure,you may hear the icemakercycie muitlpie
times when making onebatch of ice.
Shelf
Toreach the power switch.
Accessing Ice and Reaching
the Power Switch
To reach the icemaker power switch, pull the
shelf above the ice bin straight out. _M\\'avs
be sure to replace the shell
Toaccess ice, simply pull the bin flw\\'ard.
To access ice,
Icemaker Accessory Kit
If your refi_gerator did not come ah'eadv
equipped with an automatic icemakex;
an icemaker accessory kit is available at
extra cost,
Check the back of the refl_igerator fi)r
the spedfic icemaker kit needed fi)r
your Inodel.
12