GE GBS20KBPAWW Owner's Manual And Installation Instructions page 6

Aboutthe controlswith
numbered settings.
NOTE: Therefrigerator is shipped with protective film covering the temperaturecontrols.
If this film was not removedduring installation, remove it now
Initially, set the refrigerator control at 5 and the freezer control at 5 and allow 24 hours
for the temperature to stabilize.
Several adjustments may be required. Adjust the controls one increment at a time, and
allow 24 hours after each adjustment for the refrigerator to reach the temperature you
have set.
Setting either or both controls to 0 stops cooling in both the refrigerator and freezer
compartments, but does not shut off electrical power to the refrigerator.
Performance Air Flow System
The Pedmmance _Mr Flow System is designed to
maximize temperature control in the refl_igerator
and fl'eezer compamnents, This tmique special
teatuI'e consists of the _,Mr Tower along the back
wall of the refligerator and the _'Mr Tmmel on the
bottom portion of the fl'eezer rear wall. Placing
fi)od in fl'ont of the lou\'e_ on these components
will not affect perfi)m_ance.