GE GBS20KBPAWW Owner's Manual And Installation Instructions page 26

Installation Instructions
REVERSING THE DOOR SWING
(cont.)
[] TRANSFER BOTTOM HINGE
BRACKET
(freezer door models, cont.)
[] Install the bottom hinge bracket on the
left side of the cabinet.
[] Remove the insert at the top left side of the
base grille and install it on the right side.
[] Replace the base grille by aligning the
prongs on the back of the grille with the
holes in the cabinet. Push forward until
the grille snaps into place.
[] TRANSFER FREEZER DOOR STOP
(freezer door models)
[] Remove the door stop on right side of the
bottom of the freezer door by removing
the two screws.
[] Move the plastic hinge hole thimble to the
opposite hole.
[] Install the door stop on the left side.
Bottom of Freezer Door
(Right Side)
Bottom of Freezer Door
(Left Side)
26