Advertisement
Steering L evers
Reverse
(1)-Pull both s teering levers
backward.
Forward
(2) - Push b oth steering levers
forward.
Left (3) - Pull left s teering lever back o r
push r ight steering
lever forward ora
combination
ofboth.
Right (4) - Pull right steering lever back
orpush l eft s teering lever forward ora
combination
ofboth.
Press mower liftpedal and install adjustment
pin inthe desired adjustment
hole.
NOTE: Adjusting
the seat
further forward will h elp
increase the leverage
in
lifting t he mower deck ( see
Adjusting Seat on
page 13).
Adjusting
Seat
Lift adjustment lever and slide seat forward or
backward to the desired position.
NOTE: To stop, return both steering levers to
neutral.
NOTE: The steering levers must be in the
neutral position to start the engine.
NOTE: The parking brake must be
disengaged
prior to moving the steering
levers from the neutral position.
Mower
Lift Pedal (Figure
6)
Raises and lowers the deck.
2
1
3
1. Adjustment Pin
2. Mower Lift Pedal
3. Adjustment
Hole
Figure 6
NOTE: The adjustment pin is used to set the
height of the mower deck. See
SPECIFICATIONS
on page 29 for cutting
height dimensions.
1. Seat
2. Adjustment
Lever
Figure 7
FILLING FUEL TANKS
1. Clean fuel caps and surrounding area to
prevent dust, dirt, and debris from
entering fuel tanks.
2. Remove fuel caps.
IMPORTANT:
See Engine Manual for correct
type and grade of fuel.
3. Fill fuel tanks to 2-1/2 in. (6.35 cm)
below bottom of filler neck. See
SPECIFICATIONS
on page 29 for
capacity of fuel tanks.
4. Replace fuel caps.
GB - 13
Advertisement
