Akai PDP4249G Manual page 28

STEP 4
Tint
Tintvalue hasthemajor e ffect o npicture's colordisplays. W hen thevalue of
Tintis toomuch, t hepicture will become G reenish. W henthevalueof Tint is too less,
the picturewill become RedishandthenPurplish. Recommended to sethe Tint
valueasthe factorydefaultvalue.
STEP 5
Gamma
Gamma is availabe in five levels. Factory default value is in level 1. However, you can
change its level according to your preference.
STEP 6
Color Temp.
Cold Temperature, Normal Temperature, and Warm Temperature are availabe to choose.
When it is set to Cold Temp., the picture will be more in Blue/Green color series.
When it is set to Warm Temp., the picture will be more in Yellow/Orange color
series. The Color Temp. is set to "User", user can adjust the color of "Red", "Green",
and "Blue" as the custom Color Temp. according to his/her preference.
STEP 7
Color Manaaement
The "Red", "Green", and "Blue" color agents can be adjusted seperately under Color
Management. Please note that the changes made in each color agents may not have
major effects on picture's color displays. They are only for minor change of color
displays.
PAGE 28