Akai PDP4249G Manual page 10

Picture
Frequency:
1 Under the function of"Picture", please select"Frequency".
2 Use the "Left" or "Right" key to adjust the Frequency.
**Note: It is strongly advised to set the Frequency level as it is when coming out of the
factory.
Inappropriate setting of Frequency may cause the pictures to have uneven lines or noise.
Phase:
1 Under the function of "Picture", please select "Phase".
2 Use the "Left" or"Right" key to adjust the Phase.
**Note: It is strongly advised to set the Frequency level as it is when coming out of the
factory.
Inappropriate setting of Frequency may cause the pictures to have uneven lines or noise.
Auto Image:
1 Under the function of"Picture", please select "Auto Image".
2 When "Auto Image" is selected, "H-Position", "V-Position", "Frequency", and "Phase"
(IN DVI MODE):
To access the function of Picture (IN DVI Mode), press "Menu" and select "Picture".
Picture Brightness
_va Contrast _
Auto Image
Brightness:
1 Under the function of"Picture", please select "Brightness".
2 Use the "Left" or "Right" key to adjust the Brightness.
**Note: The higher the value of Brightness, the brighter the picture will be.
However, inappropriate setting of brightness may cause pictures to have whitish images.
Contrast:
1 Under the function of"Picture", please select "Contrast".
2 Use the "Left" or "Right" key to adjust the Contrast Ratio.
**Note: Contrast ratio may have certain effects on brightness. The higher the value of
Contrast, the higher Black/White level the pictures will show.
Auto Image:
1 Under the function of "Picture", please select "Auto Image".
2 When "Auto Image" is selected, "Brightness" and "Contrast" automatically tuned
to the optimal value.
PAGE 10