Zoom 607 Bass Operation Manual page 16

Effect Parameters
CONTOUR
EQ module extended parameters
These parameters serve to adjust the effect
operation for the effect type selected with the EQ
module basic parameters.
CONTOUR (Contour)
Using the 0 value as a reference (flat setting), negative values cause an
increasing boost in the low range and positive values cause an
increasing boost in the high range. When the EQ module is On, this
parameter is always active. Check this parameter if the 4-band EQ effect
type setting does not seem to produce the desired results.
(Off
indication)
ZNR/AMP
ZNR/AMP module
This module is comprised of ZNR (ZOOM Noise
Reduction) for reducing noise during play pauses
or silent passages, and an amp simulator which
simulates the sound of various bass guitar
amplifiers. Use the VALUE [+] / [-] keys to adjust
the ZNR threshold or select the type of amplifier.
ZNR
ZNR (ZOOM Noise Reduction) serves for reducing noise during play
pauses or silent passages. Higher setting values result in more efficient
noise reduction. Set the value as high as possible without causing the
sound to be cut off unnaturally.
BOX
Simulates a small built-in type bass amplifier. When this setting is selected,
the amp simulator is on and ZNR is off.
ZNR + BOX
ZNR and box amp simulator are both on. Increasing the value results in
more efficient noise reduction.
30 ZOOM 607
BASS
CONTOUR ZNR/AMP
Effect Parameters
COMBO
Simulates a large built-in type bass amplifier. When this setting is selected,
the amp simulator is on and ZNR is off.
ZNR + COMBO
ZNR and combo amp simulator are both on. Increasing the right-digit
value results in more efficient noise reduction.
STACK
Simulates a stack type bass guitar amplifier. When this setting is selected,
the amp simulator is on and ZNR is off.
ZNR + STACK
ZNR and stack amp simulator are both on. Increasing the right-digit value
results in more efficient noise reduction.
OFF
The ZNR/AMP module is off.
MOD/PITCH
MOD/PITCH module
This module contains modulation effects such as
chorus and flanger, as well as a pitch shifter. Use
the VALUE [+] / [-] keys to select the effect type
and adjust the effect intensity.
CHORUS 1
This effect mixes a variable pitch-shifted component with the original
signal, resulting in full-bodied and expansive sound. Higher setting values
result in a more pronounced chorus effect.
PITCH
+
Original sound
0
TIME
-
Adjusts the depth of the effect.
ZNR/AMP MOD/PITCH
PITCH
Effect sound
(left channel)
+
0
- TIME
PITCH
Effect sound (right channel)
+
0
TIME
-
ZOOM 607 31
BASS