Installation - Whistler 1570 Manual

Visor Mounting (optional accessory)
• Slide the visor bracket into the bracket mounting slot.
• Clip the visor bracket onto the visor making sure it is rela-
tively level and has a clear view of the road.
Insert into bracket
mounting slot
Power Connection
• Plug the small end of the power cord into the unit's power
jack.
• Plug the large end into the vehicle's cigarette lighter.
Fuse Replacement
The lighter socket plug is equipped with a replaceable 2 amp
3AG fuse located behind the silver tip. To replace the fuse,
carefully unscrew the tip of the plug. (IMPORTANT: Unscrew
slowly. The tip contains a spring which may fly out when disas-
sembling.) Insert the new fuse with the spring and screw on
the tip. With use, screw cap on plug may loosen. Retighten
occasionally.
Unscrew the tip of the lighter socket plug carefully when replacing the 2
amp fuse.

INSTALLATION

Slide on visor
8