Optional Setting; Channel Add/Delete - Sylvania CR202SL8 Owner's Manual

O
PTIONAL SETTING

Channel Add/Delete

The channel add/delete function lets you add the channel that was not
added by the auto channel scan due to the reception status at the initial
setting. You can also delete the unnecessary channels.
1
Press [MENU] to display the main menu.
MENU
2
Use [CH K/L] to select "CHANNEL SETUP",
then press [VOL X ].
CH
or
CH
VOL
3
Use [CH K/L] to select "ADD/DELETE(DTV)" or "ADD/
DELETE", then press [VOL X].
CH
or
CH
VOL
4
Select the channel you want to add or delete.
(Refer to "Channel Selection" on page 12.)
5
Use [VOL X/Y] to select "ADD" or "DELETE".
• To add or delete another channels, repeat steps 4-5.
or
VOL VOL
• Color of channel number displayed at the right top of
the TV screen indicates;
- Blue: The selected channel will be added.
- Red: The selected channel will be deleted.
e.g.) digital TV mode
- TV SETUP -
PICTURE
CHANNEL SETUP
V-CHIP SETUP
LANGUAGE [ENGLISH]
CAPTION [OFF]
DTV SETUP
e.g.) digital TV mode
- CHANNEL SETUP -
ADD/DELETE(DTV)
AUTO PRESET CH(DTV)
AUTO PRESET CH(TV/DTV)
AUTO PRESET CH(CATV)
! CATV takes approx. 50min.
e.g.) digital TV mode
D12
ADD/DELETE : DTV
6
Press [MENU] to exit.
MENU
Note:
• The main menu will disappear automatically in about 10
seconds.
• In the digital mode (DTV), you can add or delete channels
only for major channel.
• Once you delete a DTV channel, you cannot recover the
channel without performing auto channel scan again.
(Refer to "Auto Channel Scan" on page 11.)
15
EN