Initial Setting - Sylvania 6427FF Service Manual

2. Initial Setting

General
1. Enter the Service mode. (See page 5-1.)
2. Press [VOL p] button on the service remote
control unit. Display changes "C/D," "7F,"
"LANGUAGE," "ACCESS CODE," "SOUND TYPE,"
"VIDEO TONE," "FM-MODE," "V-OUT," "VIDEO,"
"AV MEMO," "STABLE SOUND," "FILTER," "500,"
"YUV MEMORY," "NO SIG BRT," "A-MUTE POL,"
and "V-MENU" cyclically when [VOL p] button is
pressed.
3. To set the following each data value, press [CH o /
p] buttons on the service remote control unit.
7F --- Set to "FF."
LANGUAGE --- Set to "SPA/FRA."
ACCESS CODE --- Set to "ON."
SOUND TYPE --- Set to "MTS."
VIDEO TONE --- Set to "ON."
FM-MODE --- Set to "OFF."
V-OUT --- Set to "OFF."
VIDEO
6427FF --- Set to "V1/V2/YUV."
EWF2705 --- Set to "V1/V2."
AV MEMO --- Set to "OFF."
STABLE SOUND --- Set to "OFF."
FILTER
6427FF --- Set to "ON."
EWF2705 --- Set to "OFF."
Adjusting the monitoring time --- Set to "500."
YUV MEMORY --- Set to "OFF."
NO SIG BRT --- Set to "0."
A-MUTE POL --- Set to "H."
V-MENU --- Set to "OFF."
3. Setting for BRIGHT, CONTRAST,
COLOR, TINT, and SHARPNESS
Data Values
General
1. Enter the Service mode. (See page 5-1.)
2. Press [MENU] button on the service remote
control unit. Display changes "BRT," "CNT," "CLR,"
"S-CLR," "C-CLR," "TNT," "V-TNT," "S-TNT," "C-
TNT," "SHARP," "S-SRP," and "C-SRP" cyclically
when [MENU] button is pressed.
CNT
1. Press [MENU] button on the service remote
control unit. Then select "CONTRAST" (CNT)
display.
2. Press [CH o / p] buttons on the service remote
control unit so that the value of "CONTRAST"
(CNT) becomes 84.
CLR
1. Press [MENU] button on the service remote
control unit. Then select "COLOR" (CLR) display.
2. Press [CH o / p] buttons on the service remote
control unit so that the value of "COLOR" (CLR)
becomes 56.
S-CLR
1. Press [MENU] button on the service remote
control unit. Then select "S-COLOR" (S-CLR)
display.
2. Press [CH o / p] buttons on the service remote
control unit so that the value of "S-COLOR" (S-
CLR) becomes 56.
C-CLR (6427FF only)
1. Press [MENU] button on the service remote
control unit. Then select "COMPONENT COLOR"
(C-CLR) display.
2. Press [CH o / p] buttons on the service remote
control unit so that the value of "COMPONENT
COLOR" (C-CLR) becomes 52.
TNT
1. Press [MENU] button on the service remote
control unit. Then select "TINT" (TNT) display.
2. Press [CH o / p] buttons on the service remote
control unit so that the value of "TINT" (TNT)
becomes 58.
V-TNT
1. Press [MENU] button on the service remote
control unit. Then select "V-TINT" (V-TNT) display.
2. Press [CH o / p] buttons on the service remote
control unit so that the value of "V-TINT" (V-TNT)
becomes 59.
S-TNT
1. Press [MENU] button on the service remote
control unit. Then select "S-TINT" (S-TNT) display.
2. Press [CH o / p] buttons on the service remote
control unit so that the value of "S-TINT" (S-TNT)
becomes 59.
C-TNT (6427FF only)
1. Press [MENU] button on the service remote
control unit. Then select "COMPONENT TINT" (C-
TNT) display.
2. Press [CH o / p] buttons on the service remote
control unit so that the value of "COMPONENT
TINT" (C-TNT) becomes 64.
SHARP
1. Press [MENU] button on the service remote
control unit. Then select "SHARPNESS" (SHARP)
display.
2. Press [CH o / p] buttons on the service remote
control unit and select "40."
5-2 L3800EA