:
Note
For ease of assembly, install Console Assembly before folding Treadmill Uprights into position.
Step 1 - Install Console
•
Plug the four connectors on the Console Assembly (#10) into the four connectors on the Treadmill Uprights
(#11).
•
Insert the Console Assembly (#10) into the Treadmill Uprights (#11) using extreme care not to damage or
pinch any of the wiring harness. Gently pull the excess slack from the wire harness at the bottom of the
Treadmill Uprights.
•
Use four Allen Screws (#2) to secure the Console Assembly.
��
Step 2 - Secure Treadmill Uprights
•
Fold the Treadmill Uprights (#11) into place
using extreme care to avoid pinching the
wiring harness at the base of the uprights.
Use two Bolts (#5), three Spring Washers
(#6), four Washers (#7), two Bolts (#18), two
Nuts (#17), and the two Pivot Bolts (#15) to
secure the uprights.
Assembly Procedure
�
��
��
��
�
�
�
�
�
�
��
��