Trimming; Cleaning - Philips NORELCO PT734 User Manual

ENGLISH
16
Stretch your skin with your free hand so
2
blades can lift and cut whiskers. Gently
press razor to skin so the floating heads
can follow the contours of your face.
DO NOT press too hard. Too much
pressure can pinch the skin into the
combs.
Turn razor OFF by pressing the on/off
3
button once.
Clean the razor after each use (see
4
chapter 'Cleaning').
C
Put the Protective Cap on the razor to
5
protect razor heads.
Replace your Philips Norelco razor heads (model
#HQ8) once a year for optimal shaving results.

Trimming

To groom sideburns and moustache:
1 Turn razor ON.
C
2 Push down spring-release trimmer switch.
The trimmer can be activated while the razor is
running.
C
3 Hold trimmer as shown and move in
downward strokes with gentle pressure.
C
4 Close trimmer by pressing trimmer down.
5 Turn razor OFF.

Cleaning

C
◗ This symbol indicates that the razor can be
rinsed under running tap water.
◗ Always clean your razor after each use.
◗ Always switch razor OFF, unplug and remove
power cord before cleaning.
◗ Never clean, remove or replace head
assembly while motor is on.
◗ Do not apply pressure to combs. Do not
touch razor heads with hard objects as this
may dent or damage precision-made slotted
combs.
◗ Do not use razor if combs are damaged or
broken. Facial injury may occur.
◗ Do not use compressed air, abrasives,
scourers or liquids such as acetone to clean
the razor.
Cleaning the Shaving Unit
The razor heads may be quickly cleaned after
each use by rinsing with hot water: Water from
the tap should be on a hot setting, BUT BE
CAREFUL TO TEST WATER FIRST SO AS NOT
TO BURN OR SCALD HANDS.
ENGLISH
17