Setting Colour Density (Color Level); Always Displaying Image In Viewfinder - Hitachi DZ-MV3000E Instruction Manual

SETTING COLOUR DENSITY (COLOR LEVEL)

You can adjust the colour density of the LCD monitor screen and viewfinder.
1
Press the MENU
button, use the
/ / /
buttons to choose
"Adjust" on the "LCD/
EVF Setup" menu
screen, and then choose
"Color Level".
The colour density adjustment bar will
appear on the screen.
2
Use the / buttons
for adjustment.
Press :
For lighter colour.
Press :
For denser colour.

ALWAYS DISPLAYING IMAGE IN VIEWFINDER

1
Press the MENU
button, use the
/ / /
buttons to choose "EVF
Display" on the "LCD/
EVF Setup" menu
screen.
2
Choose "On" and decide it.
3
Press the MENU button to end the setting:
Images will always appear in the viewfinder
regardless of whether the LCD monitor is
open/closed.
92
LCD / EVF Se t up
/
Ad j u s t
EVF D i s p l a y
ENTER RETURN
LCD / EVF Ad j u s t
LCD B r i g h t n e s s
EVF B r i g h t n e s s
Co l o r L e v e l
ADJUST ENTER
Colour density
adjustment bar
LCD / EVF Se t up
/
Ad j u s t
EVF D i s p l a y
Au t o
On
ENTER RETURN
3
Press the MENU button.
:
Note
• The colour setting will be stored in memory even after
the DVD video camera/recorder is turned off.
• Even if the brightness or density of LCD monitor
RAM RAM
screen or viewfinder is changed, the brightness or
density of the recorded image itself will not change.
RAM RAM
:
Note
The setting on EVF Display will be stored in memory
even after the DVD video camera/recorder is turned off.
RAM RAM