Hitachi DZ-HS500E Instruction Manual page 142

Message
CARD ALMOST FULL
Card error has
occurred.
Card error has
occurred.
Format the card now?
Card error has
occurred.
Formatting is not
complete.
Card error has
occurred. Keep card
inside & restart.
Card full.
Card is not formatted.
Format the card now?
CHECK CARD
CHECK DVD
CHECK HDD
Control Information
Error.
Dubbing is not
complete.
DVD error has occurred.
Finalizing is not
complete.
DVD error has occurred.
Format the DVD now?
DVD error has occurred.
Formatting is not
complete.
DVD error has occurred.
Keep DVD inside &
restart.
142
Cause & Troubleshooting
Remaining space is only enough to record less than 10 stills.
Delete unnecessary stills and try the card, or use another card.
• The card terminals may be dirty: Wipe off dirt, and try the card
again, or use another card.
• Data other than still image may be included: Use another card.
Was the card formatted on PC? Was formatting interrupted
midway? When using the card on this DVD video camera/
recorder, choose "YES" and format it.
The card may be damaged: Use another card.
Card error could have occurred during editing of scenes. Turn off
the DVD video camera/recorder with the card being used inside,
connect the AC adapter/charger, and then power the DVD video
camera/recorder again.
Delete unnecessary stills and try the card, or use another card.
Was the card formatted on PC? When using the card on this DVD
video camera/recorder, choose "YES" and format it.
The inserted card cannot be used in this DVD video camera/
recorder: Use another card.
A disc unusable on this DVD video camera/recorder may have
been inserted or the disc may be damaged.
Make sure that the type of disc is correct, and make sure that the
disc is not write-protected.
The HDD may have been destroyed. Also check to see whether
the HDD is write-protected.
Mismatch may occur between the recorded image and scene
information.
Update the control information.
• Use another disc.
• See *3 and *4 on page 146.
This message will appear when dubbing has failed.
• Disc error occurred during finalising, and finalising failed.
Replace the disc.
• See *3 on page 146.
• Has the disc been initialised on PC? Has initialising the disc on
PC been interrupted?
Choose "YES" and initialise the disc when using it on this DVD
video camera/recorder. Initialising the disc will erase all data on
it.
• See *2 on page 146.
The disc may be dirty.
Remove the disc and wipe off fingerprints, dust, etc. before
reusing it, or use another disc.
This message may also appear if you insert a disc for which
formatting was interrupted midway. In this case, use another disc.
Disc error could have occurred during editing of scenes.
Turn off the DVD video camera/recorder with the disc being used
in it, connect AC adapter/charger, and then power the DVD video
camera/recorder again. Repair of scenes will be tried.
Reference
page
88, 109, 158
28
108
28
29, 34
88, 158
108
28
28, 109
109
110
—
83
111
108
12, 108
29