Hitachi DZ-HS500E Instruction Manual page 132

7
Click "Authoring" and create a DVD-Video
menu.
Clicking "Authoring" will display the editing
screen of DVD-Video menu. The video file
previously imported into PC will appear in
"Source". Choose the desired video file, and click
"Add titles": The video file will be registered.
When using a video file imported into PC
using ImageMixer 3, click "File" to choose the
folder in which the video file will be stored.
Click
Clicking "Theme" or "Set title menu" will
allow you to change the design of DVD-Video
menu.
Choose the type of disc to be created (8 cm/
12 cm/2-layer) using [Set] - [Configuration].
8
Click "Write" to create a DVD-Video.
Clicking "Write" will display the screen for
writing.
Check "Create disc", perform setting for
write, such as choosing DVD write drive, and
then set a blank DVD-RW/DVD-R into the
drive.
Clicking "Preview" will allow you to check
any image of DVD to be created.
132
Click
Click the "Write" button: The screen for
setting write will appear. After checking the
settings, click "OK": Writing will start.
When write is complete, the drive will open
to eject the DVD: Creation of an original DVD
is now finished.
:
Note
• If you load a written DVD-RW in the write drive, the
dialogue "Are you sure you want to delete the content
of disc?" will appear.
Deleting the content of disc will erase all data on the
disc: Carefully check the contents of disc.
Choosing "Yes" will display the screen for choosing
the disc erasure method: After checking it, click the
"OK" button. Once the contents on disc have been
deleted, the cover of disc insertion block on DVD
video camera/recorder will open. Close the cover
following the message instruction.
• If the disc contains a video file that does not conform
to DVD-Video format, the video will be re-encoded,
resulting in deterioration of image quality.
• If you execute "File" - "Save project", the halfway
operation status can be saved as a project file.
Reading in this saved project file will allow you to
restart the operation from the saved status.
• A project file will be saved in the project folder that
was designated when images were saved, and the file
name will be automatically attached.
• If a video recorded on the HDD in this DVD video
camera/recorder for extended hours is too long for
one disc, cut-edit the video so that it can be recorded
on one disc. See the on-line instruction manual of
ImageMixer 3 for cut-editing of videos. To display the
ImageMixer 3 manual, choose "Help", and then
"Image Mixer 3 Help (H) F1", while ImageMixer 3 is
being executed.
Click
Click