Audio Mode Setting; Dual Mono Setting; Dynamic Range Setting - Hitachi HTDK150EBS Instruction Manual

Dvd digital theater system dvd/vcd/cd player with av surround receiver
Hide thumbs Also See for HTDK150EBS:
Table of Contents

Advertisement

A u d i o M o d e S e t t i n g
Path: Main Page
Speaker Setup Page
Selects the Dual Mono reproduction mode to support dual
mono programs.
STEREO: 2-channel stereo outputs, for stereo and head-
phone listening.
VSS: 2-channel Virtual Surround outputs.
PROLOGIC: Dolby Pro Logic decoding function is activated.
5.1CH: Depending on the audio encoding format of the
playing disc, Dolby Digital or DTS decoding function is acti-
vated automatically.
LT / RT: 2-channel Tape outputs (for later decoding by Dolby
Pro Logic decoder).
Note
If the loading disc is identified as VCD or CD format, the unit
will set the Audio Mode to PROLOGIC automatically.
If the loading disc is identified as DVD format, the unit will
set the AUDIO Mode to 5.1CH automatically.
If LT/RT, STEREO or VSS is selected, the outputs of Center,
Rear and Subwoofer are disabled.
Depending on the disc, maybe there is no audio output if
LT/RT or STEREO is selected.
Depending on the disc, the actual outputs may not match
you selection.
Audio Mode.
STEREO
VSS
PRO LOGIC
5.1CH
LT / RT
D u a l M o n o S e t t i n g
Path: Main Page
Dolby Digital Setup
Select the Dual Mono reproduction mode to support dual mono
programs.
STEREO: Reproduces both channels as stereo.
LEFT MONO: Only reproduces left mono signal to FL and
FR channels.
RIGHT MONO: Only reproduces right mono signal to FL and
FR channels.
MIXED MONO: Reproduces both channels mixed together.
D y n a m i c R a n g e S e t t i n g
Path: Main Page
Dolby Digital Setup
In many listening situations, it is objectionable to allow the
sound to become very loud, and thus the loudest sounds
must be compressed downwards in level. Likewise, the very
quiet sounds would be inaudible and must be brought up-
wards in level to be heard. Dolby Digital satisfies these needs
through the dynamic range controlling.
Selects the dynamic range compression to fit the individual
listening situation of the audience. The variable range is from
FULL, 7/8 to 1/8, or OFF.
FULL: Audio with fully compressed dynamic range.
7/8~1/8: Audio with partially compressed dynamic range.
OFF: Audio with uncompressed dynamic range.
Note
The Dual Mono and Dynamic Range settings only support
Dolby Digital programs.
Dual Mono.
STEREO
L - MONO
R - MONO
MIX - MONO
Dynamic RNG.
FULL
6/8
4/8
2/8
OFF
41

Advertisement

Table of Contents
loading

Table of Contents