Table of Contents
Advertisement
A n t e n n a H o o k u p s
Connect the supplied AM / FM antennas for listening to the radio.
•
Connect the AM loop antenna to the AM terminals.
•
Connect the FM pigtail antenna to the FM 75-ohm coaxial terminal.
Note
•
To prevent noise pickup, keep the AM loop antenna away
from the system and other components.
•
Be sure to fully extend the FM pigtail antenna.
•
After connecting the FM pigtail antenna, keep it as horizontal
as possible.
Skill of connecting antenna and speaker wires
Push and hold Speaker terminal tab down to insert wire. Re-
lease tab to lock wire in terminal. Make sure the insulation is
completely removed from the ends of the Antenna and speaker
wires at all connection points.
AM wire antenna
(supplied)
AM
FM
(75 )
FM wire antenna
(supplied)
FR
FL
C
S R
(4 )
If you have poor FM reception
Use a 75-ohm coaxial cable (not supplied) to connect the
system to an outdoor FM antenna as shown below.
Outdoor FM antenna
Note
•
If you connect the system to an outdoor antenna, ground it
against lightning.
•
To prevent a gas explosion, do not connect the ground wire
to a gas pipe.
SL
System
Ground wire
AM
(not supplied)
FM
(75 )
To ground
19
Advertisement
Table of Contents
