Lenovo ThinkPad X230 User Manual page 93

6. With the notched end of the memory module toward the contact edge side of the socket, insert the
memory module into the socket at an angle of about 20 degrees
7. Pivot the memory module downward until it snaps into place.
8. Make sure that the memory module is firmly fixed in the slot and cannot be moved easily.
9. Reinstall the memory slot cover and tighten the screws to secure it.
10. Reinstall the battery. See "Replacing the battery" on page 67.
11. Turn the computer over again. Connect the ac power adapter and all cables.
Checking the total amount of memory installed in your computer
To make sure that the memory modules are installed correctly, you can check the total amount of memory
your computer has by doing the following:
1. Turn the computer on.
2. When the logo screen is displayed, press F1. The ThinkPad Setup program opens. The Installed
memory item shows the total amount of memory installed in your computer.
1 ; then press it in firmly
.
Chapter 6 Replacing devices
2 .
75