Lenovo ThinkPad X230 User Manual page 131

Table 5. Config menu items (continued)
Menu item
Submenu item
PCI Express Power
Management
Express Card Speed
Power On with AC Attach
Intel (R) Rapid Start
Technology
Value
• Disabled
• Enabled
• Generation 1
• Automatic
• Disabled
• Enabled
• Disabled
• Enabled
Enter after:
• Immediately
• 1 minute
• 2 minutes
• 5 minutes
• 10 minutes
• 15 minutes
• 30 minutes
• 1 hour
• 2 hours
• 3 hours
Chapter 8
Comments
Enable or disable a feature
that automatically adjusts
power management when
there is no PCI Express
activity. Normally, it is not
necessary to change the
setting.
Set the transfer speed of the
ExpressCard to the desired
level of performance.
The Automatic option
enables the ExpressCard to
specify the transfer speed it
supports.
Enable or disable a feature
that powers on the system
when the ac power adapter
is attached.
If you select Enabled, the
system is powered on when
the ac power adapter is
attached. When the system
is in hibernate state, the
system resumes.
If you select Disabled, the
system is not powered on
nor resumed when the ac
power adapter is attached.
To use this feature, a special
partition on the solid state
drive is required.
When enabled, you can
enable the 30 Day Standby
function through the Power
Manager program. The
function enables the
computer to enter a lower
power state after the
specified time in sleep
state. And it takes only
seconds to resume normal
operation.
.
Advanced configuration
113