Table of Contents
Advertisement
Problems and solutions for pro-
grammed recordings
The video recorder does not react
• While a programmed recording is being made,
you cannot operate your video recorder manu-
ally. If you want to cancel the programmed
C/ A A
recording, press
• The end of the tape was reached during
recording.
Switch off the video recorder with
. A programmed recording (timer) will only func-
tion if the video recorder is switched off.
'TURN OFF VCR FOR TIMER RECORDING'
appears on the screen
* The video recorder was switched on several
minutes before the start of a programmed
recording.
'
' will flash in the video recorder display
* No cassette was inserted. Insert a cassette and
switch off the video recorder using
STANDBY/ON y y
.
Cassette is ejected during recording
* The end of the tape was reached during
recording.
The 'PROTECTED CASSETTE CANNOT
RECORD' error message appears briefly in
the screen then the cassette is ejected
* A cassette was inserted with the security tab
removed.
Undo the erase protection (chapter 'Manual
Recording', section 'Preventing accidental eras-
ing of cassettes') or insert a different cassette.
.
STANDBY/ON y y
How to check, or delete a pro-
grammed recording (TIMER)
1.
1.
Switch on the TV. If required, select the pro-
gramme number for the video recorder.
2.
2.
Press
MENU
3.
3.
Select 'TIMER' with
.
B 1
4.
4.
Select 'TIMER LIST' with
confirm with
SELECT K L CHOOSE B
ONCE
DAILY
WEEKLY
TIMER LIST
END=EXIT
5.
5.
Select timer block with
6.
6.
To cancel the recording, press
7.
7.
To end, press
8.
8.
Switch off with
How to change a programmed
recording (TIMER)
1.
1.
Switch on the TV. If required, select the pro-
gramme number for the video recorder.
2.
2.
Press
MENU
3.
3.
Select 'TIMER' with
.
B 1
4.
4.
Select ONCE, DAILY, or WEEKLY recording
with
K B
L C
5.
5.
Select a TIMER block with
number indicates an empty TIMER block.)
ONCE
TIMER - 1 2 3 4 5 6 7 8 -
SELECT TIMER NUMBER
END=EXIT
6.
6.
Press
CLEAR
correct information with
7.
7.
To end, press
8.
8.
Switch off with
17
. The main menu will appear.
. Then press
K B
L C
K B
L C
.
B 1
.
B 1
CLEAR
.
STATUS/EXIT
with
STANDBY/ON y y
. The main menu will appear.
. Then press
K B
L C
. Then press
B 1
. (The flashing
0..9
to delete information and input
.
0..9
STATUS/EXIT
.
STANDBY/ON y y
.
, and
.
.
.
EN
Hide quick links:
Advertisement
Table of Contents
