Philips Q549.2E LA Service Manual page 40

EN 40 6. Q549.2E LA
Main Menu Sub-menu 1
Audio reproduction
Source selection
Miscellaneous
Option number Group 1
Group 2
Store
Initialise NVM
Store
Software maintenance Software events
Hardware events
Operation hours display
Test setting Digital info
Install start frequency
Install end frequency
Default install frequency
Installation
2009-May-08
Alignments
Sub-menu 2 Sub-menu 3
Acoustic system
EXT1/AV1 type SCART CVBS RGB LR
CVBS Y/C YPbPr LR
CVBS Y/C YPbPr HV LR
(CVBS) YPbPr LR
EXT2/AV2 type SCART CVBS RGB LR
CVBS Y/C LR
(CVBS) YPbPr LR
CVBS Y/C LR
EXT3/AV3 type None
CVBS
CVBS LR
YPbPr
YPbPr LR
YPbPr HV LR
VGA Off/On
SIDE I/O Off/On
HDMI 1 Off/On
HDMI 2 Off/On
HDMI 3 Off/On
HDMI 4 Off/On
HDMI side Off/On
HDMI CEC Off/On
HDMI CEC RC passthrough Off/On
HDMI CEC Pixel Plus link Off/On
Region Europe/AP-PAL-MULTI/Australia
Tuner type HD1816-MK1/TD1716-MK4/
TD1716-MK3/HD1816-MK2
System RC support Off/On
Embedded user manual Off/On
Start-up screen Off/On
Wallpaper Off/On
Hotel mode Off
e.g. "08192.02181.01387.45160"
e.g. "10185.12448.00164.00000"
Display
Clear
Test reboot
Display
Clear
0003
QAM modulation: 64-QAM
Symbol rate: 23:29
Original network ID: 12817
Network ID:12817
Transportstream ID: 2
Service ID: 3
Hierarchical modulation: 0
Selected video PID: 35
Selected main audio PID: 99
Selected 2nd audio PID: -1
000
999
Digital only
Digital + Analogue
Description
Cabinet design used for setting dynamic audio pa-
rameters.
Select input source when connected with external
equipment.
Select input source when connected with external
equipment.
Select input source when connected with external
equipment.
Select VGA On/Off
Select SIDE I/O On/Off
Select HDMI 1 On/Off
Select HDMI 2 On/Off
Select HDMI 3 On/Off
Select HDMI 4 On/Off
Select HDMI side On/Off
Select HDMI CEC On/Off
Select HDMI CEC RC passthrough On/Off
Select Pixel Plus link On/Off
Select Region/country.
Select type of Tuner used.
Select System RC support On/Off.
Select Embedded user manual On/Off.
Select Start-up screen On/Off.
Select Wallpaper On/Off.
Hotel mode is Off.
The first line (group 1) indicates hardware options 1
to 4.
The second line (group 2) indicates software options
5 to 8.
Store after changing.
N.A
Select Store in the SAM root menu after making any
changes.
Display information is for development purposes.
Display information is for development purposes.
In case the display must be swapped for repair, you
can reset the ""Display operation hours"" to ""0"". So,
this one does keeps up the lifetime of the display it-
self (mainly to compensate the degeneration behav-
iour).
Display information is for development purposes.
Install start frequency from "0" MHz
Install end frequency as 999 MHz
Select Digital only or Digital + Analogue before instal-
lation.