Power Supply & Charging - Kogan EZINAV G4 User Manual

2.2 Power Supply & Charging
Charge the GPS navigator fully with the charger before the first use.
2.2.1 Power Supply
The Kogan G4 GPS can be powered by the built-in battery or external power supply.
When the GPS navigator is unconnected to the charger, it is powered by the Li-polymer
」in the system main interface shows current
battery. The battery capacity icon「
residual battery capacity.
When the GPS navigator is connected to the charger, it is powered by external power and
the battery is charged.
[Attention] The GPS navigator adopts an internal removable Li-polymer battery. To avoid
battery rupture, explosion, release of hazardous substance or burn, do not unpack, pierce,
strike on or discard the battery in fire or water.
The work temperature of the device is 0~50°C and its storage temperature is -10~60°C.
Do not leave the device under heat sources or in high thermal areas such as an
unattended vehicle in the strong sunshine.
End-of-life battery disposal please follow local relevant regulations
2.2.2 Charging by AC Adapter
Plug the USB terminal of the AC adapter into the USB port on the left side of the GPS
navigator and the other to the power socket to supply power and charge the GPS
navigator.
[Note] The charging indicator light is red during charging. Do not unplug the AC adapter
until the battery is fully charged and the indicator light turns green. Please charge the GPS
navigator when the battery is low or used up in succeeding use.
2.2.3 Charging by Car Charger
Plug one terminal of the car charger into the USB port on the left side of the GPS
navigator and the other to the charging port to supply power and charge the GPS
3