Setting Up An Internet Connection - Kogan WiFi Digital Radio Manual

Wi-fi digital radio with ipod docking station
Hide thumbs Also See for WiFi Digital Radio:
Table of Contents

Advertisement

WIFI RADIO DAB/DAB+ WITH IPOD DOCK INSTRUCTION MANUAL - ENGLISH

4.3 Setting up an Internet connection

In order to access to the internet radio features, you must connect to your WIFI broadband connection.
Please follow the steps below to setup the Internet connection by using the ''Scan for networks''
function.
1. From the main menu, rotate the ''TUNING'' key to scroll to ''System Settings'' and press the
''TUNING'' for the selection.
2. Rotate the ''TUNING'' key to scroll to ''Internet setup'' and press down the ''TUNING" key to
select.
3. The radio will ask you to choose the network you would like to use. If there is more than one
available, all will be listed. Rotate the ''TUNING'' key to scroll through the options and press
the ''TUNING'' for the selection. There are two special options :
[Rescan] - Rescan for all possible networks
[Manual Config]- Set up the wireless configuration manually
4. If the network you have chosen doesn't require a password, the radio will automatically
connect. ''Connected'' will be shown on the screen after the radio is successfully connected to
the internet.
5. If your chosen network has security enabled, you will be asked to input the relevant key or
password. Remember the password will be case-sensitive. Rotate the ''TUNING'' key to move
the flashing cursor along the row of characters, and press the ''TUNING'' to select the flashing
character.
the '<' symbol = back space
the '↵' symbol = enter
the 'C' symbol = cancel
When the password has been entered, move the cursor to the '↵' symbol and press the
''TUNING''. The radio will connect to the network.
The radio will remember the security key or password; you will not be required to enter it
again, even after the radio has been disconnected from main power.
NOTE :
1. Users can edit their WIFI settings by accessing the ''System settings''
''Manual settings''.
2. Selecting ''View settings'' allows you to access other Wi-Fi connected settings. These are :
''Active adapter'', which displays the current connection being used to connect to the
Internet.
''MAC address''
''DHCP status''
''PC settings''
''SSID''
''IP settings'', which displays the IP address, the subnet mask and the gateway address.
''Internet setup''
10
Page

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents