Advertisement
Setting the delay time
Input the distances from the listening position to the speakers and set the surround
delay time.
Preparations:
Measure the distances from the listening position to the speakers (L1 to L3 on the
diagram at the right).
L1: Distance from center speaker to listening position
L2: Distance from front speakers to listening position
L3: Distance from surround speaker to listening position
NOTES:
• Set the center speaker at the same distance from the front speakers (left and right) or the subwoofer, or so that
the difference in distance (L2 – L1) is 1.5 meters or less.
• Set the surround speakers (left and right) at the same distance from the front speakers (left and right) or the
subwoofer, or so that the difference in distance (L2 – L3) is 4.5 meters or less.
1
Use the
(up) and
speakers and the subwoofer to the listening position.
• The number changes in units of 0.3 metres each time one of the buttons is
pressed. Select the value closest to the measured distance.
("SW" appears only when subwoofer = yes.)
NEXT
Press the NEXT button to switch to the center speaker setting.
2
Use the
(up) and
speakers to the listening position.
• The number changes in units of 0.3 metres each time one of the buttons is
pressed. Select the value closest to the measured distance.
NEXT
Press the NEXT button to switch to the surround speaker setting.
NOTE:
• No setting when "None" has been selected for the center speaker.
3
Use the
(up) and
speakers to the listening position.
• The number changes in units of 0.3 metres each time one of the buttons is
pressed. Select the value closest to the measured distance.
NOTE:
• No setting when "None" has been selected for the surround speakers.
C
FL
FR
L
1
L
Listening
2
position
L
3
SL
SR
(down) buttons to set the distance from the front
(down) buttons to set the distance from the center
(down) buttons to set the distance from the surround
After setting up the system
1
SET UP
Press the SYSTEM button to finish system set up.
SYSTEM
This completes the system setup operations. Once the system is set up, there is no need to make the settings
again unless other components or speakers are connected or the speaker layout is changed.
ENGLISH
9
Advertisement
