Advertisement
• CONNECTIONS
Connecting the audio components
•
Do not plug in the power cord until all connections have been completed.
•
Be sure to connect the left and right channels properly (left with left, right with right).
•
Insert the plugs securely. Incomplete connections will result in the generation of noise.
•
Note that binding pin plug cords together with power cords or placing them near a power transformer will
result in generating hum or other noise.
•
Noise or humming may be generated if a connected audio equipment is used independently without turning
the power of this unit on. If this happens, turn on the power of the unit.
Decoders with 6-channel
analog outputs, etc.
LINE OUT
LINE IN
LINE OUT
Tape deck or MD
R
L
R
L
INPUT
OUTPUT
Turntable (MM cartridge)
AC CORD
AC 230 V, 50 Hz
Ground wire
PRE OUT jack
PRE OUT jacks
Connect the internal amplifier's
subwoofer to the subwoofer terminal.
(Refer to page 5. )
LINE OUT
DIGITAL OUT
CD player
OPITCAL
R
L
OUTPUT
Connecting the antenna terminals
DIRECTION OF
BROADCASTING
STATION
FM ANTENNA
75 /ohms
COAXIAL
CABLE
FM INDOOR ANTENNA
(An Accessory)
ENGLISH
AM LOOP
ANTENNA
(An Accessory)
3
Advertisement
