Advertisement
Using the DTS mode
Play a pre-recorded source with
mark.
1
Press the DVD button.
DVD
FUNCTION
EX.: DVD
2
Select the DIGITAL input mode.
INPUT MODE
3
Set the DTS mode.
DOLBY/DTS
SURROUND
SURR.MODE
4
Start playback on the selected component. For
operating instructions, refer to the various
component's manuals.
5
Adjust the MASTER VOLUME control.
MAIN VOLUME
MASTER
VOL
NOTE:
•
CDs with the DTS feature require a decoder, so when using the "ANALOG" input mode, a noise may be
produced by the DTS encoded signal. Therefore, before playing the DTS feature, be sure to select the
DIGITAL input mode.
• This unit equipped with a high performance DSP (Digital Signal Processor) which uses digital signal processing
1
5
-
+
DOLBY
D I G I TA L
• Surround modes and their features
-
+
3
2
CD
MD
DVD
POWER
TAPE
VCR
HTA
TV
VCR
DVD
MD/
MD/TAPE
FUNCTION
PRESET
TAPE MON
1
TAPE / VCR
GROUP
A/B
CHANNEL
CHANNEL
CD/MD/DVD
5
MASTER
DISPLAY
VOL
ENTER
NEXT
SET UP
SYSTEM
SURROUND
AUDIO
TITLE
MENU
TV INPUT
TV
CHANNEL
VOLUME
T.TONE
SURR.MODE
MUTING
VIDEO SELECT
3
CH SELECT
CH
VCL
STATUS
REMOTE CONTROLLER
RB - DD1
•
•
Using the DSP surround simulation
• DSP SURROUND SIMULATION
to synthetically recreate the sound field. One of eight preset surround modes can be selected according to the
program source and the parameters can be adjusted according to the conditions in the listening room to
achieve a more realistic, powerful sound. These surround modes can also be used for program sources not
recorded in Dolby Surround Pro Logic, Dolby Digital or DTS.
1
STEREO
Sound is produced from the two front channels. (Nothing is output from
the Surround and center channels.)
2
6CH EXT. IN
Connect the output of the external decoder to this unit's 6CH EXT. IN.
3
MULTI STEREO
In this mode, the signals of the front left channel are output from the left
surround channel, the signals of the front right channel are output from
the right surround channel, and the same (in-phase) component of the
left and right channels is output from the center channel. This mode
provides all speaker surround sound, but without directional steering
effects, and works with any stereo program source.
4
MONO MOVIE
Select this when watching monaural movies for a greater sense of
expansion.
5
ROCK ARENA
Use this mode to achieve the feeling of a live concert in an arena with
reflected sounds coming from all directions.
6
JAZZ CLUB
This mode creates the sound field of a live house with a low ceiling and
hard walls. This mode gives jazz a very vivid realism.
7
STADIUM
Use this to enjoy stadium effect.
8
MATRIX
Select this to emphasize the sense of expansion for music sources
recorded in stereo. Signals consisting of the difference component of
the input signals (the component that provides the sense of expansion)
processed for delay are output from the surround channel.
Depending on the program source being played, the effect may not be very noticeable.
In this case, try other surround modes, without worrying about their names, to create a sound field suited to
your tastes.
The presence of surround parameter settings as well as the setting items will differ depending on the surround
mode.
ENGLISH
17
Advertisement
