Event Search - Pelikan 9CH MPEG4 User Manual

4. Once you have selected the time zone, press the SEL button to move to the 60 minutes
time table.
5. Select All or a specific channel to search by using the UP and DOWN arrow buttons.
6. Once you select the channel, use the LEFT / F/ADV or RIGHT/ F/REW arrow buttons to
move the time line select bar (blue) to the point you wish to start playing the video clip.
7. Press the SEL button to playback the recorded video.

5-2-2. Event Search

The Event Search window is used to find stored video. Three categories of search filters can
be applied: DATE, CHANNEL and TYPE. Press SEL to select a value and move down to the
next category and use the UP arrow button to move up to the categories you have
previously entered. The ESC button will return the user to the previous screen.
1. Select the date of the video to begin searching. Use the LEFT, RIGHT, UP, and DOWN
buttons to navigate through the days.
2. Once you have selected the date, press SEL to move to the CHANNEL selector.
3. Use LEFT and RIGHT buttons to change the channel selection from ALL to any of the
available channels.
4. Once you have selected the channel, press SEL to move to the TYPE selector.
5. Use the LEFT and RIGHT buttons to change the type of recording to ALL, MOTION,
SENSOR, MANUAL, or CONTINUOUS.
6. Once you have selected the type of recording to search for, press SEL to produce a list
of instances that fit your search criteria.
7. Use the UP and DOWN buttons to scroll through the on-screen listings.
8. Use the LEFT and RIGHT buttons to display a list of events that happened previous to or
after the current selection.
9. Once the desired event has been selected, press SEL to start playing back the selected
video.
10. Press the BACKUP button to launch the archiving function in playback mode.
Figure 5.2.3. Event Search screen
45