Table of Contents
Advertisement
3-4. Setup – Device Mode
To set values for device, use the UP and DOWN controls to navigate through the menu items.
Change the value of the menu item using the LEFT and RIGHT controls.
Item
ALARM OUT
SPOT-OUT
PTZ
CHANNEL
MOTION ZONE
MOTION SENSITIVITY
Figure 3.3.2. Schedule recording setup screen
Figure 3.4.1. Device mode setup screen
Table 3.4.1. Menu items in Device Setup screen
Set the sensor, motion, and video loss for each alarm.
Set the all details for spot monitoring.
Set the PTZ camera speed, number, type and ID.
Select specified channel for motion zone setup.
Select Full Zone or Partial Zone for motion sensing.
Set the motion sensitivity for the specified channel.
Control the motion sensitivity from 1 to 9.
Description
25
Advertisement
Table of Contents
