Spot - Out; Ptz Setup - Pelikan 9CH MPEG4 User Manual

3-4-2. SPOT – OUT
Item
SPOT TYPE
SPOT ON EVENT
SPOT EVENT DWELL
TIME
SEQUENCE
SEQ-DWEL TIME
SPOT CHANNEL

3-4-3 PTZ Setup

To control the PTZ functions of the camera, connect the controller to the RS-485 port.
Figure 3.4.3. SPOT-OUT setup screen
Table 3.4.3. Menu item in SPOT-OUT Setup screen
Select either FULL or QUAD for spot channel display.
Enable/disable spot channel display when event occurred.
Set the dwell time for the display of the event activated channel.
Enable/disable sequential display of spot channel in full screen.
Set the dwell time for spot channel display in sequential display.
Set the channel for spot monitoring.
Figure 3.4.4. PTZ Control Setup Screen
Description
27