Connect A Network Camera - Panasonic BB-HGW700A Installation & Troubleshooting Manual

2.6

Connect a Network Camera

1.
Connect the Ethernet cable between the camera and the LAN jack of the router.
2.
Insert the AC adaptor cord into the DC IN jack of the camera.
3.
Insert the AC cord into the AC adaptor socket and the plug into an outlet (The camera will be
turned on automatically.)
Camera Automatic Setup
If a Panasonic Network Camera (Customer-provided) is connected and the power turned on, this
product automatically sets the IP address, subnet mask and other network settings. After this
product is connected to the Internet, check that the camera is turned off and follow the steps
above.
To the PC
To the outlet
[For assistance, please call: 1-800-272-7033]
Installation/Troubleshooting
To the modem
1.
2.
3.
23