Memory Transmission
Manual Number Dialling
To dial the telephone number manually, follow the steps below.
1
2
Enter a telephone number from the keypad.
(Up to 36 digits)
You can also designate more that one destination.
Ex:
5 5 5 1 2 3 4
3
The document(s) begin to store into memory.
Then starts dialling the telephone number.
NOTE
1 If you need a special access number to get an outside line, dial it first then press
enter a pause (represented by a "-") before dialling the full number.
Ex: 9 PAUSE 5551234
2 If you are using Pulse dialling and you wish to change to Tone dialling in the middle of dialling,
press
The dialling mode will be changed from Pulse to Tone after dialling the digit "/".
Ex: 9 PAUSE TONE 5551234
Set document(s) face down.
(represented by a "/").
Sending Documents
DOCUMENT SET
5551234❚
* STORE *
05%
PAUSE
to
43