Advertisement
TROUBLE SHOOTING GUIDE
PROBLEM
POSSIBLE REASON
1.
Power cord not firmly plugged
HAND VACUUM
into outlet.
WILL NOT
2.
No power in wall outlet.
OPERATE
3.
Needs servicing.
HAND VACUUM
1.
Dust cup is full.
WILL NOT PICK-UP
2.
Unit clogged.
OR SUCTION
3.
Dust Cup Filter needs
POWER IS WEAK
cleaning or replacing.
1.
Dust cup is full.
DUST ESCAPING
2.
Dust Cup Filter is not
FROM HAND
installed correctly.
VACUUM
3.
There is a puncture/hole in
Dust Cup Filter.
HAND VACUUM
HOSE OR
1.
Hose clogged.
BRUSHES WILL
2.
Dust cup is full.
NOT PICK-UP
REPLACEMENT FILTERS
Replacement dust cup filter SKU# AKC031
for Model EP031KCW
Call:
1 (800) 798-7398
Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time
FOR TECHNICAL SUPPORT
Call: 1 (800) 798-7398
Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time
Please Note
The Dust Cup Filter is washable. It should, however, be replaced every three
(3) months to ensure peak performance of your vacuum.
Important
Make sure that Dust Cup Filter is completely dry before re-installing back
in the hand vacuum.
POSSIBLE SOLUTION
1.
Plug unit in firmly.
2.
Check fuse or breaker.
Replace fuse/reset breaker.
3.
Call 1 (800) 798-7398.
1.
Allow unit to cool down, then
Restart. Empty dust cup –
(see page 4).
2.
Turn unit off and unplug
from wall outlet. Remove
Dust Cup Filter and check
for object(s) in air duct and
remove.
3.
Clean or replace Dust Cup
Filter. (see page 4)
1.
Empty dust cup.
2.
Review Dust Cup Filter
instructions. (see page 4)
3.
Replace dust cup filter. (see
page 4)
1.
Remove hose and/or
bushes. Remove obstruction
from hose.
2.
Empty and clean dust cup.
5
GETTING TO KNOW YOUR HAND VACUUM
1. Suction Hole
2. Dust Cup Release Button
3. On/Off Power Switch
4. Handle
5. Dust Cup (Container)
* Illustrations may differ from actual product.
Technical Specifications
Voltage:
120V., 60Hz.
Power:
3.75 Amps, 450 Watts
6. Dust Cup Filter
7. Upholstery Brush
8. Crevice Tool
9. Flexible Hose
2
Advertisement
