NOTE:
If the mower
will be stored
for longer than 3 months,
remove
the
spark
plug
and pour
three
tablespoonsful
of clean
motor
oil into
the
cylinder.
Pull the starter
rope slowly
two or three times to distribute
the oil.
Replace the plug.
CYLINDER
MOTOR
OIL
Removal
from Storage
1. Remove
the spark plug; check that it is clean and properly
gapped
(p.
29). Pull the starter
rope several
times.
2. Thread the spark plug in by,hand
until it seats, then use the plug wrench
to tighten
l/8 to l/4 turn further.
3. Check the engine
oil level and condition.
4. Fill the fuel tank and start the engine.
NOTE:
If the cylinder
was coated
with
oil, the engine
will smoke at start
up; this is normal.
/
25 .