Passive Arming By-Pass - Autopage RF-505 Operation Manual

PASSIVE ARMING BY-PASS—

The RF-505 security system can temporarily by-pass the passive arming
function via the remote transmitter. To temporarily by-pass passive arming,
exit the vehicle and close all doors. The LED will begin to fast flash the 30-
second timer for passive arming. Within the 30-second timing window press
the CAR button on the remote transmitter firmly twice, the security system
will respond with (1) chirp and the LED will turn ON. The security system
will remain in this temporary mode for as long as you wish. To exit passive
arming by-pass, press the LOCK/UNLOCK button and the system will
return to its normal status.
This feature is only available when the Passive Arming feature is
programmed ON in feature programming.
Transmitter Button Actions
Press
Once
Press & Hold
3 Seconds
Press Twice
When Arming
Press Twice
When Disarming
Press & Hold
2 Seconds
Press Twice - Only
During Passive Arming By-Pass
Press
Twice
Press
Once
Press Both
Together
Press Both
Together 3 Seconds
Press Both
Together 3 Seconds
Press Both Together
Ignition in OFF Position Arm /Disarm
2nd Car Operation
Garage Door Opener
5
System Function
Lock Doors/Unlock Doors
Arm/Disarm System
Panic
Function
Arm & Delete
Optional Sensor
Disarm & Unlock
2 Step Door Locks
Channel Two
Trunk Control
Passive Arming
Car
Locator
Channel Three
AUX Control
Channel Four
AUX Control
SIS-5 Sensor Adjust Mode
See Mode Operation
Passive/Manual Arming
See Mode Operation
Silent
Side Button
Switching Code