Transmitter Operation; Active Arming - Lock & Arm - Autopage CAR-PRO CPX-2350 Operation Manual

TRANSMITTER OPERATION

Transmitter Button
Button
– Button
Button
Button for 3 seconds
Button
Button for 2 seconds
-
+ Button
+ Button for 1 seconds
ACTIVE ARMING – LOCK & ARM:
1. Press button on transmitter.
The siren will chirp once and the parking lights will flash once indicating
2.
that the system is now armed. The vehicle doors will lock upon arming
when interfaced with the security system.
Note: Defective sensor reminder: If the siren sounds 3 chirps, then you
have left a door, trunk, or hood lid ajar.
SILENT ARMING / DISARMING: Press the
transmitter to arm or disarm your security system, No chirp sound will be
heard; arm / disarm confirmation will be through the vehicles parking lights
only.
SHOCK SENSOR / OPTIONAL SENSOR BY-PASS: Press the
the transmitter twice within 3 seconds will arm the security system, by-pass
the shock sensor or the optional sensor connected to 4 pin plug. The system
will chirp one additional time to confirm the sensor bypass mode was
activated. The sensor bypass feature is programmed to activate for one
arming cycle only. The security system will return to normal operation during
the next arming cycle
System Function
Arm / Lock door
Arm and Delete
Optional Sensor
Car Locator
Panic function
Disarm & Unlock
Door
Pop Trunk Release
Passive Arming By-
pass
Silent Arm / Disarm
Activate Car-Jacking
+ button together on the
Remark
Press twice.
System in Armed.
Press 3 seconds
Press 2 seconds
While passively
arming
Ignition in "off"
position.
Ignition in "on"
position. If
programmed
button on