File Setting (Current Folder); Mode Setting (Recording Quality); Mic Setting (Microphone Quality); Vox Setting (Voice Activated Recording) - Oregon Scientific VR383 User Manual

FILE Setting (Current Folder)

Choose the current folder (Folder A or Folder B). Each can carry up to 99 messages
and indexes.

MODE Setting (Recording Quality)

You can choose between three different recording quality options.
Option Description Recording Quality
SP Standard Play High
EP Extended Play Medium
LP Long Play Low
MIC Setting (Microphone Sensitivity)
You can choose between three different microphone sensitivity options.
Option Description
Auto Microphone sensitivity automatically set.
Hi High sensitivity - clearer & louder recording, more susceptible to
noises & distortions.
Lo Low sensitivity - lower volume in recording, less susceptible to
noises & distortions.

VOX Setting (Voice Activated Recording)

This setting pauses a recording automatically when no noise is detected for 2 seconds.
The recording resumes when voice is detected again.
BEEP Setting (Beep Tone)
The beep tone setting, if enabled, causes the unit to beep whenever a button is pressed
(excluding the LASER button).
LASER POINTER
Your voice recorder is integrated with a laser pointer that can emit red laser beam for
pointing purposes.
USING THE LASER POINTER
Take extreme precaution to protect your eyes while using the laser pointer.
Do not look at the laser pointer directly when the laser beam is emitting, as
this can permanently damage your eyes. Point the laser away from you and
any other people at all times.
14
VR383 Manual-Eng (086-002906-020)
Length of Recording Time
84 minutes
102 minutes
136 minutes
It is advisable to lock the laser when the function is currently not in use.
To activate the laser pointer, press and hold the LASER button.
LOCKING THE LASER
The LASER LOCK switch can be used to prevent the
accidental activation of the laser beam. When locked, the
LASER button is disabled, and the laser beam cannot be
emitted. Simply slide the switch position to lock or unlock
the laser.
OTHER FEATURES
LOCKING RECORDER BUTTONS
This feature disables all recorder buttons, thus preventing
the accidental recording, playback, and erasing of messages.
Simply slide the switch position to lock or unlock the
recorder buttons.
The LASER button is still active when the recorder
buttons are locked. The LASER LOCK switch is
separate from this function and is the only way to
lock the LASER button.
RESETTING THE UNIT
Using the RESET Hole
Your voice recorder may need to be reset if the device is not functioning properly. Use
a blunt stylus and press into the RESET Hole to return the device to default values.
Recorded messages are not erased after the RESET Hole has been pressed.
Full Reset
You may need to perform a FULL RESET if the unit does not function properly even
after the RESET Hole has been pressed. To perform a FULL RESET, press and hold
the ERASE button while using the blunt stylus to press into the RESET hole.
Recorded messages are COMPLETELY erased from all folders after a Full Reset.
CONNECTING TO AN EXTERNAL EARPHONE
You can use the included earphone to privately listen to messages. When the ear-
phone is plugged in, the speaker is disabled automatically.
15