Table of Contents
Advertisement
Introduction Scanning
You can scan the first 5 seconds of all recorded messages within the current folder.
When the unit is in Recorder Mode, and the device is not in the midst of a playback
or a recording:
Press & hole
1. Recorder Mode
2.Word "INTRO" and
current message
interchangeably
blink. Current
message plays for
5 seconds.
Erasing Messages
When the unit is in Recorder Mode, and the device is not in the midst of a playback
or a recording, you can choose to erase the messages stored:
Press
1.Recorder Mode.
2."ERASE" and
Press SKIP / REVIEW
currently selected
to choose message.
message blinks.
Wait 1 second
4.Message erased. Device
returns to Recorder Mode.
12
VR383 Manual-Eng (086-002906-020)
Wait 5
seconds
3.Next message plays
for 5 seconds. This
continues until all
messages are played
or
is pressed.
Press
3."BUSY" displayed while
message is erased.
VOICE RECORDER SETTINGS
Your voice recorder has five different settings that can be configured:
Italicized and underlined options are product default options.
Setting
Description
Options
FILE
Currently active folder selected.
Folder A / Folder B
MODE
Different recording quality and
SP (Standard Play) / EP (Extended
recording capacity.
Play) / LP (Long Play)
MIC
Adjust sensitivity of microphone. Auto / Hi / Lo
VOX
Enable/disable voice detection.
On / Off
BEEP
Button press confirmation tone.
On / Off
Changing Voice Recorder Settings
Press VOL+/VOL- to select between options for each of the settings.
Press &
hold DISP/SET
1.Recorder Mode
2.Select currently
active folder.
Press DISP/SET
Press
DISP/SET
4.Select microphone
5.Enable/Disable
sensitivity.
voice detection.
Press DISP/SET
7.Return to Recorder Mode
13
Press
DISP/SET
3. Select recording quality.
Press
DISP/SET
6. Enable/Disable beep tone.
Advertisement
Table of Contents
