Advertisement
BEFORE OPERATING CLEANER,
READ ALL INSTRUCTIONS IN
THIS MANUAL CAREFULLY.
Table of Contents
Maintenance and Customer Service, Accessories, Caution,
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . page
Grounding Instructions, Warranty . . . . . . . . . . . . . . . . . . . . . page
Operating Instructions, Troubleshooting Guide . . . . . . . . . . . page
Maintenance and Customer Service
Your Oreck Low Boy is a product of precise engineering. The motor
bearings are permanently lubricated and should not be oiled. If you
require additional information or have problems with your Oreck
appliance, you may call ORECK customer service at:
0800 67 68 69
Please specify the model number and serial/code number which can be
found on the data plate on the back of the vacuum.
Save your sales or purchase slip. Should your Oreck appliance require
warranty service in the U.S.A., present this slip to the Authorized Service
Center as your proof of purchase date or, in Canada, call customer
service.
Accessories
ITEM
1.
Green Bristle Holder: included with machine.
2. Drive Pad Holder
3.
Scrub Brush: Hard Surface cleaning.
4.
NY/LO Grit
5.
Carpet Bonnet
6.
Lambs Wool Bonnet
7.
Pad, Black
8.
Pad, White
9.
Pad, Brown
CAUTION
This appliance must be connected to a grounded metal, permanent
wiring system; or an equipment-grounding conductor must be run with
the circuit conductors and connected to the equipment-grounding
terminal or lead on the appliance.
ALWAYS UNPLUG THE MACHINE BEFORE INSTALLING OR
REMOVING ACCESSORIES. ALWAYS WEAR SHOES WHEN USING
ELECTRICAL EQUIPMENT.
IMPORTANT SAFETY
2
3
4
• Use indoors only.
• Risk of explosion - Floor sanding can result in an
• Do not allow to be used as a toy. Close attention is
• Do not leave appliance unattended when plugged in.
• Use only as described in this manual. Use only manufac-
• Do not use with damaged cord or plug. If appliance is not
• Do not pull or carry by cord, use cord as a handle, close
PART #
• Do not run appliance over cord.
53304-01
• Use extra care when cleaning on stairs.
53269-51-0327
• Connect to a properly grounded outlet only. See
82001
82003
• Unplug before installing or removing pads/cleaning
82008
82009
• Warning - To reduce the risk of fire, use only commer-
82004
82005
• Do not unplug by pulling on cord. To unplug, grasp the
82006
• Do not handle plug or appliance with wet hands.
• Do not put any object into openings. Do not use with any
• Keep hair, loose clothing, fingers and all parts of body
• Turn off all controls before unplugging.
• Do not use appliance in an enclosed space where
• Only use the brushes provided with the appliance or
• The appliance is suitable for commercial use, for example
2
INSTRUCTIONS
When using an electrical appliance, basic
precautions should always be followed,
including the following:
READ ALL INSTRUCTIONS BEFORE
USING THIS FLOOR MACHINE
WARNING
To reduce the risk of fire,
electric shock, or injury:
explosive mixture of fine dust and air. Use floor sanding
machine only in well ventilated area.
necessary when used by or near children.
Unplug from outlet when not in use and before servicing.
turer's recommended attachments.
working as it should, has been dropped, damaged, left
outdoors, or dropped into water, return it to a service
center or call customer service at: 0800 67 68 69
door on cord, or pull cord around sharp edges or corners.
Keep cord away from heated surfaces.
grounding instructions.
brushes.
cially available floor cleaners and waxes intended for
machine application.
plug, not the cord.
opening blocked; keep free of dust, lint, hair and anything
that may reduce air flow.
away from openings and moving parts.
flammable, explosive or toxic vapors are given off by oil
base paint, paint thinner, some mothproofing substances,
or in an area where flammable dust is present.
those specified in the instruction manual. The use of other
brushes may impair safety.
in hotels, schools, hospitals, factories, shops, offices and
rental businesses.
SAVE THESE INSTRUCTIONS
Advertisement
