Oracle Secure Backup Installation And Configuration Manual page 43

Release 10.3
Table of Contents

Advertisement

autoch
4 0/1/1/1.1.0
target
10 0/1/1/1.2
tape
8 0/1/1/1.2.0
...
fcp
2 0/2/1/0.99
ext_bus
9 0/2/1/0.99.15.255.1
target
1 0/2/1/0.99.15.255.1.3
autoch
8 0/2/1/0.99.15.255.1.3.0 schgr
tape
19 0/2/1/0.99.15.255.1.3.1 stape
tape
20 0/2/1/0.99.15.255.1.3.2 stape
Using the ioscan output, make a note of the bus number, target ID, and SCSI
3.
LUN for the tape devices.
Table 2–4
Table 2–4
Device
Tape library
(autoch)
Tape drive (tape)
Tape library
(autoch)
Tape drive (tape)
Tape drive (tape)
Use makedev to create attach points so that Oracle Secure Backup can identify
4.
devices for backup and restore operations.
The following example runs makedev using the information in
example creates the attach point /dev/obl/8 for the ADIC FastStor 2 library on
SCSI bus instance 3 with the target ID 1 and SCSI LUN 0.
% makedev
Enter logical unit number 0-31 [0]: 8
Enter 'd' if this device is a tape drive or 'l' if a SCSI-2 addressable
Enter SCSI bus instance: 3
Enter SCSI target id 0-16777215: 1
Enter SCSI logical unit number (lun) 0-7 [0]: 0
/dev/obl/8 created
The following example runs makedev using the information in
example creates the attach point /dev/obt/9m for the HP Ultrium 2 tape drive on
SCSI bus instance 3 with the target ID 2 and SCSI LUN 0.
% makedev
Enter logical unit number 0-31 [0]: 9
Enter 'd' if this device is a tape drive or 'l' if a SCSI-2 addressable
Enter SCSI bus instance: 3
Enter SCSI target id 0-16777215: 2
Enter SCSI logical unit number (lun) 0-7 [0]: 0
/dev/obt/9m created
schgr
CLAIMED
tgt
CLAIMED
stape
CLAIMED
fcp
CLAIMED
fcpdev
CLAIMED
tgt
CLAIMED
CLAIMED
CLAIMED
CLAIMED
shows the relevant information from
Information Required by makedev
Type
Name
SCSI
ADIC FastStor 2
SCSI
HP Ultrium 2
FC
ADIC Scalar 24
FC
IBM ULTRIUM-TD3
FC
IBM ULTRIUM-TD3
tape library [d]: l
tape library [d]: d
Creating Attach Points with makedev
DEVICE
ADIC FastStor 2
DEVICE
DEVICE
HP Ultrium 2-SCSI
INTERFACE FCP Domain
INTERFACE FCP Device Interface
DEVICE
DEVICE
ADIC Scalar 24
DEVICE
IBM ULTRIUM-TD3
DEVICE
IBM ULTRIUM-TD3
Example
Bus Number
Instance
Target ID
3
1
3
2
9
3
9
3
9
3
Installing Oracle Secure Backup on Linux or UNIX 2-17
2–1.
SCSI LUN
0
0
0
1
2
Table
2–4. The
Table
2–4. The

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Secure Backup and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Secure backup 10.3

Table of Contents