Other Functions - Onkyo PHC-5 Instruction Manual

Operating the PHC-5 System (continued)

Other functions

SENDING/
LEARNED
POWER DISPLAY
POWER
VIDEO CONTROL
TV/VCR
POWER
TV/VIDEO VOLUME
DISTANCE
MODE
SURROUND SUB
FRONT BALANCE
INPUT SELECTOR
TV VIDEO AUX
REMOTE CONTROLLER
14
Turning off the light on the display
Pressing the DISPLAY button turns on/off the light on the display of the unit.
This button is disabled in Stereo mode.
LEARN
Adjusting the balance
FRONT BALANCE
TV CONTROL
CH
EXPAND
√: Press this button to shift the sound to the left.
®: Press this button to shift the sound to the right.
Note on adjusting the balance:
In Virtual Surround mode, set the balance in the center position and do not
adjust it. Shifting the sound in this mode may impair the Virtual Surround
effect.
The PHC-5 remembers the balance setting in Stereo mode after you turn off
the power to the unit. However, if you change to Virtual Surround mode, the
VOLUME
balance setting is automatically reset to the center. Also, any balance setting
made in Virtual Surround mode will be reset to the center after you turn off
MUTING
the power to the unit.
RC-382M
Muting the sound
Press the MUTING button to mute the sound. Press the button again or press the
VOLUME buttons (VOLUME†/π) to cancel muting.
The LEVEL meter flashes during mute.
DISPLAY
The sound pans
to the left.
MUTING
PANORAMA
WIDE
NORMAL
The sound pans
to the right.
MIN LEVEL MAX
Flash