Features - GE Spacemaker DSXH47 Owner's Manual And Installation Instructions

About your dryer features.
Signal Option
When the signal is on it will sound just
before the end of the cycle to remind
you to remove the clothes.
If the dried load cannot be removed
prompdy during the cycle, the Cycle
Selector will advance to the
EXTENDED
COOL DOWN setting. Unheated tumbling
confintles during EXTENDED COOL DOWN
and WRINKLE CARE (on some models)
for 40 minutes to help reduce wrinkling.
When
the CYCLE SIGNAL is on, it will
sound briefly every five minutes as a
reminder to remove the load.
NOTE:
• If items are removedbeforethe end of
the cycle,pressthe CANCEL buttontwice.
• Removegarmentspromptly at the sound
of the signal. Place clotheson hangers
so wrinkles won'tset in.
• Use the Cycle Signal especially when
dryingfabrics like polyester knits and
permanentpress. Thesefabrics should
be removedso wrinkles won'tset in.
Wrinkle Care
Use this option to minimize the wrinkles
in clothes. It provides approximamly 15
minutes of no-heat rambling after the
clothes are dty.
This option can only be used with the
PERMA PRESS and DELICATEcycles.
Prywith
f!at blade
screwdriver Light
housing
Replacing the Dryer Light Bulb
WARNING:To,ed.ce the
risk of electric shock, disconnect this
appliance flom the power supply
before attempting any user
mainmnance. Turning the controls
m the 0FFposifion does not
disconnect this appliance flom the
power supply.
The dryer light is locamd above the dryer
door opening.
Before replacing the light bulb, be sure m
unplug the diTer power cord or disconnect
the dryer at the household disuJbufion
panel by removing file fllse or switching
off the circuit breakeL
Toreplace the dryer light.
[7] Using a small fiat blade screwdriver,
pry the bottom of the light cover out
and off the light housing.
[2-] Unscrew the bulb when cool and
replace it with an appliance bulb of
the same or lower wattage.
[j] Snap the light cover back on the light
housing.
Drying Rack (on some models)
A handy drying rack may be used for drying
articles such as smff_d toys, pillows or
washable sweaters.
F_] Remove the lint screen.
[2--]Place the flont bar under the lip of the
lint screen opening.
[-_] _qlen items are (hT, remove the rack
and replace the lint screen. DO NOT
OPERATE THEDRYER WITHOUTTHELINT
SCREEN IN PLACE UNLESSTHEDRYING
RACK IS IN PLACE.
NOTE:
• The dxying rack must be used wifll die
TIMEDDRY cycle.
• Do not use this d_ying rack when there
are other clothes in the d_yeL
7