19. Mower Installation
Your Mower installs without the use of tools, Raise Attachment
Lift Lever to its highest position
Turn height adjustment knob
to lowest position_
a
Slide Mower under tractor, discharge guard to RH
Side,
b.
Install front hinge pin through axle and parallel link
(Fig,26), Secure with retainer spring
c
Install rear hinge pin through mower lift brackets and
parallel link (Fig.26)_ Secure with retainer spring
d_ Move lift lever forward to lower suspension
arms,
e
Slide trunnions through lift brackets holes and secure
with retainer spring (Fig27)
f
With belt routed around R H mower pulley and idler
pulley, roll belt over mower drive pulley (Fig27)
Drive
schematic
decal on mower housing
g,
Roll belt over L,H mower pulley
h
Use lift lever to raise mower
i
Turn height adjustment
knob clockwise (,'-_)
to the
middle of its travel,
AND ADJUSTMENT
\
PARALLEL
LINK
RETAINER
SPRINGS
_._
FIGURE 26
REAR
HINGE
PIN
FRONT
HINGE
PIN
SUSPENSION
ARM
IDLER PULLEY
RETAINEF
SPRING
RUNNI(
_LIFT
BRACKET
FIGURE
27
MOWER
' DRIVE
P[ILLEY
21