GE Monogram ZDOD240 Owner's Manual page 7

IMPORTANT SAFETY INSTRUCTIONS
HOW TO
C0 NNE CT EIJ,2C7"RICITY
&WARNING:
THIS PRODUCT MUST BE CONNECTED TO A POWER SOURCE WITH
GROUND FAULT CIRCUIT INTERRUPT (GFCI) PROTECTION WHEN
INSTALLED IN AN OUTDOOR LOCATION. LOCAL CODES MAY REQUIRE
A SEPARATE CIRCUIT.
IF YOU ARE UNCERTAIN ABOUT THE GFCI PROTECTION ON THE POWER SOURCE TO WHICH YOU ARE
CONNECTING THIS APPLIANCE, PLEASE CONTACT A PROFESSIONAL ELECTRICIAN FOR VERIFICATION.
Refrigerator MUST be plugged into a
functioning GFCI circuit. Test your circuit
1)y plugging your refrigerator into the
outlet and pressing file test button for that
circuit, veri_'ing that the unit turns off
(tile light will not work with the door
open). Then press the Reset 1)utton and
confirna that the light comes oi1 with the
door open. If you do not know if you have
a (;FCI circuit, contact a qualified
electrician for assistance.
Do not place the unit in standing water or
allow the power cord to be immersed.
Do
not, under any circumstances, cut or
remove the third (ground) prong from
the power cord. For personal safety, this
appliance mttst be properly grounded.
Tile power cord of this appliance is
equipped with a 3-prong (grounding)
ping which mates with a standard 3-prong
(gronnding) wall outlet to minimize the
possibility of electric shock hazard flom
this appliance.
Have tile electrical outlet and circuit
checked by a qualified electrician to make
snre tile outlet is properly grounded.
Where a standard 2-prong elecuical
outlet is encounmred, it is your personal
responsil)ility and ol)ligation to have
it replaced with a properly grounded
3-prong wall outlet.
The appliance should always be plugged
into its own individual electrical outlet
which has a voltage raOng that matches
the rating plate. This provides tile best
performance and also prevents overloading
house wiring circuits which could cause a
fire hazard flom overheamd wires.
Nexer unplug an appliance by pnlling oi1
the power cord. Always grip tile ping firmly
and pull straight out flom tile outlet.
Repair or replace immediately all power
cords that have become flayed or otherwise
damaged. Do not use a cord that shows
cracks or abrasion damage along its length
or at either end.
When moving the appliance, be careflfl
not to roll oxer or damage tile power cord.
DO NOT USE AN ADAPT_R PLUG OR EXTENSION CORD
(Adapt_plug:_ not p_mitted in Canada)
Do not use an adapter plug to connect tile
refligerator to a 9-prong outlet,
Do not use an extension cord with this
appliance.
SAVE 7"HESE INS 7"RUC 7YONS