GE PFIC1NFYCWV Owner's Manual And Installation Instructions page 5

A_out TurboCooL
TM
(on some models) GEAppliances.com
(onsome models)
iill
TM
_ _ i_i_ii _iii _i _ _/
ii_ _i _ _! _l_ ii_ i_ii_ _ II il
ITUR OCOOL
(on some models)
How it Works
TurboCool rapidlg cools the refrigerator
compartment in order to more quickly
cool foods. Use TurboCool when adding a
large amount of food to the refrigerator
compartment, putting away foods after they
have been sitting out at room temperature or
when putting away warm leftovers. It can
also be used if the refrigerator has been
without power for an extended period.
Once activated, the compressor will turn on
immediatel9 and the fans will cycle on and
off at high speed as needed for eight hours.
The compressor will continue to run until the
refrigerator compartment cools to
approximatelg 34°F(I°C), then it will cgcle on
and off to maintain this setting. After 8 hours,
or if TurboCool is pressed again, the
refrigerator compartment will return to
the original setting.
How to Use
PressTurboCool. The refrigerator
temperature displag will showbc.
After TurboCool is complete, the
refrigerator compartment will return
to the original setting.
NOTES: The refrigerator temperature cannot
be changed during TurboCool.
The freezer temperature is not
affected during TurboCool.
When opening the refrigerator door
during TurboCool, the fans
will continue to run if theg have
cgcled on.
DoorAlarm
(on some models)
About Door
Alarm
(onsome models)
The door alarm will sound if ang door is open
for more than 2 minutes. The beeping stops
when gou close the door.
[]
ALARM DOOR
(on some models)
(on some models)
i I i
TM
/_[]
ENERGY
SAVER
(on some models)
About Energg Saver
(onsome models)
This product is equipped with an Energg
Saver feature. The refrigerator is shipped with
the Energg Saverfeature enabled.
Over time, moisture can form on the front
surface of the refrigerator cabinet and cause
rust. If moisture does appear on the front
surface of the refrigerator cabinet, turn off
the Energg Saverfeature bg pressing and
releasing the ENERGY'SAVER p ad on the
control panel.