PFIC1NFY
GE Profile
Counter-Depth 20.9 Cu. Ft. Bottom-Freezer Drawer Refrigerator
™
Dimensions and Installation Information (in inches)
Height to top of hinge (in.) A
Height to top of case (in.) B
Case depth without door (in.) C
Case depth less door handle (in.) D
Case depth with door handle (in.) E
Depth with fresh food door open 90° (in.) F
Width (in.) G
Width with door open 90° inc. door handle (in.) H
Each side (in.)
Top (in.)
Back (in.)
Note:
Anti-tip bracket part number 200D8494P001 will be shipped with
every counter-depth model
*Does NOT include a decorative panel
1/2"
Alternate
water
line location
through floor
For answers to your Monogram,
®
GE
®
appliance questions, visit our website at
Water hook-up
on the refrigerator
ge.com or call GE Answer Center
®
Top View
800.626.2000.
Water hook-up
on the refrigerator
Recommended
single loop of 1/4" copper water line
Allow 48" minimum water
24"
line to enable refrigerator
to be pulled forward
69-5/8
69
23-7/8
26-3/4*
31
43-1/8
35-3/4
40-7/8
1/2"
1/8
Alternate
1
water
line location
through floor
1/2
Water hook-up
on the refrigerator
Top View
Installation of water outlets
Water hook-up
on the refrigerator
Recommended
single loop of 1/4" copper water line
1/2"
Alternate
water
line location
through floor
GE Profile
or
18"
™
Top View
service,
Rear Wall View
Recommended single loop
of 1/4" copper water line
Allow 48" minimum water
line to enable refrigerator
24"
to be pulled forward
94" French Door Bottom Freezer Refer
A
B
Front View
Allow 48" minimum water
Allow 48" minimum water
24"
line to enable refrigerator
line to enable refrigerator
to be pulled forward
to be pulled forward
Recommended water line
Recommended water line
location using recess
location using recess
in rear wall
in rear wall
Water hook-up
on the refrigerator
H
G
C
D
1/2"
Alternate
water
line location
through floor
Top View
Top View
Water hook-up
on the refrigerator
Recommended single loop
of 1/4" pex water line
24"
18"
Rear Wall View
Specification Created 3/09
E
F
IMPORTANT: Before finalizing specifications
for your GE Profile counter-depth refrigerator,
please NOTE:
• A minimum width of 36" is required for
refrigerator installation
• Be sure to allow for 1/2" or 3/4" side panels
in addition to the 36" minimum
Listed by
Underwriters
Laboratories
210811