GE AENIO Series Owner's Manual And Installation Instructions page 12

Installation Instructions
r91 INSTALL SUPPORT BRACKET AND
FOAM TOP WINDOW GASKET
%
-& CAUTION:
To prevent broken glass or
damage to windows, on
vinyl or other similarly
constructed windows,
attach the support bracket
to the window sidejam.
Vinyl
Attach the support bracket
with one Type C screw.
Wood
[]
©
Cut the foam top window gasket to the window
width.
Stuff the foam
between the glass
and the window
to prevent air and
insects from getting
into the room.
NOTE: If the gasket supplied does not fit your
window, obtain appropriate material locally to
provide a proper installation seal.
INSTALL THE AIR CONDITIONER
IN THE CASE
Slide the air conditioner into the case by
the base pan. Do not push on the controls,
styrofoam air discharge housing or the finned
coils. IVlake sure the air conditioner is firmly
seated.
Do not press on
these areas-
damage to the unit
may result
BasePan
[] INSTALL THE AIR CONDITIONER
IN THE CASE (CONT.}
FB1 Replace the 2 ground screws removed earlier,
one on each side of the case.
IMPORTANT: The ground screws must be
reinstalled to ensure a proper ground.
rc1 Attach the front grille to the case by inserting
the tabs on the grille into the slots on the front
top of the case. Push the grille in.
r61
Secure the front grille to the case by replacing
the 2 screws removed earlier. Press on the top
of the grille to help
with side screw installation.
rE1 Connect power.
12