GE AENIO Series Owner's Manual And Installation Instructions page 10

Installation Instructions
[] ATTACH THE TOP MOUNTING RAIL
SEAL STRIP
Remove the backing from the top mounting rail
seal strip and attach the seal strip to the bottom
of the top maounting rail, along the front edge.
Allow the seal strip to overlap 3/8" on each end.
3/8"
It
Top mounting rail
_ emove
backing
from seal
strip
3/8"
FRONT VIEW Top mounting rail
J
I I
I;;................./' .......... "...... k--
3/8" overlap Seal strip 3/8" overlap
[] INSTALL THE
SIDE ACCORDION PANELS
[_] Slide the left and right accordion panels into
the top and bottom mounting rails.
[]_] Attach the accordion panels to the case using 3
Type A screws on each side.
Top mounting rail
Accordion
panel
Type A
screws \
BACK
Bottom mounting rail
B]
INSTALL THE TOP MOUNTING RAIL
ONTO THE CASE
Attach the top mounting rail onto the top of the
case with 3 Type B screws.
B
screws
[Z] PREPARE THE WINDOW
• Cut the window sash seal to the window
width and stick the adhesive side to the
bottom of the sash.
10