GE Monogram ZDBR240 Owner's Manual page 9

Controls and Features
Br,verag'e ( er_lr,r
Glass shelves
Tempered glass shelxes in the bmerage
center unit are remoxable for easy
cleaning or for storing larger items.
To remove a shelf, open tile door
completely to avoid potential damage to
tile gasket. Lift up on the back of tile shelf
slightly. Tilt tile shelf to one side at all
angle while pnlling forward.
Appearance may vary
To replace a shelf, open tile door
complemly to avoid pomntial damage
m tile gasket. Tilt the shelf to one side
at all angle and slide toward the back wall,
placing one side onto tile shelf support.
Place tile other side onto tile opposite
shelf support. Ensure rear locking tabs
are engaged. When installed properly,
tile shelf will not slide forward when
gently pulled.
To remove, lift up on the back of the shelf Tiltthe shelf at an angle while removing
or replacing
Place in slots when replacing the shelf
QuichSl)ace
slzdf
This shelf splits ill half and slides under
itself for storage of tall items on the shelf
belox_
Step l: Lift the back edge of the flont half
of the shelf.
Step 2: Pull slightly forward.
Step 3: Lower the back edge of tile flont
half of the shelf while sliding it underneath
the back half.
Tile entire Quick Space shelf call be
remoxed and replaced (see (-;lass Shelxes
section).
Step 1
Step 3
lnterior jitn
The interior fail is located in the rear wall
of tile beverage center, and is designed to
run continuously to help maintain tile
proper cooling temperature. The interior
fan will only turn off when the door is
opened.