GE Monogram ZDBR240 Owner's Manual page 10

Controls and Features
Beverag'e ( enlr, r
Loading
tips and
suggestions
Tile bottom two flfll extension drawers
hold fixe bottles each and are loaded with
necks facing tile rear. Tall bottles should
not be loaded on the bottom drawer
because they may prexent the door from
closing.
Do not allow children to climb, stand
oi hang on the beverage center shelves
or flfll extension drawers. They could
seriously injure themselves and possibly
cause damage to the beverage centen
NOTE: This unit is for storing bmerages
only and not intended for the storage of
perishable foods.
Bottom drawer arrangement
Removing
i: ll
extension
drawers
The bottom flfll extension drawers pull
out so bottles can conveniently be added
oi removed.
The upper flfll extension slide can be
removed for nmgnums or larger bottles.
To remove:
1. Pull the flfll extension drawer out to the
STOP position.
2. Push the tab on right drawer guide
down while pulling the tab on left guide
up, and pull the drawer out.
To replace:
1. Push the drawer slide arm back into
the unit.
2. Pull the small slide sub assembly
completely forward.
3. Insert the sides of the drawer back
into the guides.
4. Push until the tabs lock into place.
Appearance may vary
Tab (push tab down on right
drawer guide, pull tab up on
left drawer guide)
To replace, push drawer slide Pull small slide sub assembly
arm back into unit completely forward
NOTE: Make sure the tabs on the flfll
extension drawer guides are flflly engaged
before loading any bottles. Pull the drawers
out all the way to the STOP position and
push back in several times m make sure
locking tabs are properly engag>d.
Wood
drawer
frvnts
10
The flfll extension drawer fronts on the
bexerage center are unfinished cherty
wood. During use, oil from hands may
accumulate and stain the wood.
• The drawer flonts may be stained and
sealed to match adjacent cabinet1 y. The
tinmd glass will make the stained wood
appear darker. A true color match can be
seen only when the door is opened.
• Apply the stain and sealer according to
the manufacturer's instructions. To avoid
unpleasant odor, keep the door open to
ventilate and allow the stain/sealer to dry
completely before using the product.
NOTE: Natural wood may xary slightly in
grain and color.